McNeil and NRM California

Model 270 -- ORBICUSHION MACHINE GENERAL SPECIFICATIONS

DIMENSIONS 
	Extruder System
	Length 79" X Width 41" X Height 55" (2007 mm  X 1041 mm X 1397 mm)
	Floor space 80" x 64" (2032 X 1626 mm)
	Weight 2600 lbs. (1182 kg) 	Shipping weight 3200 lbs. (1455 kg)
	
	Spin Station (Build Section)
	Length 33"X Width 36"X Height 46" (838 mm X 914mmX1168 mm)
	Floor space 130" X 64" (3302 X 1626 mm)
	Weight 600 lbs. (273 kg)	Shipping weight 800lbs. (364 kg)

	Precure Builders 
	Length 51" X Width 56"X  Height 60" (1295 mmX1422 mmX1524 mm)
	Weight 1200 lbs. (545 kg)  	Shipping weight 1500 lbs (682kg) 
	Floor space for Orbicushion with two Builders:
                         174" X 105" (4420 X 2667mm)

UTILITY REQUIREMENTS 
         Power 	200-208V, 3 Ph, 50/60 Hz*,150A
	                230 V, 3 Ph, 50/60 Hz*,125A
	                380 V, 3 Ph, 50 Hz**100A
	                415 V, 3 Ph, 50 Hz,100A
	                460 V, 3 Ph, 50/60 Hz,60A
	                550 V, 3 Ph, 60 Hz (with special transformer),50A
	      *  Part wind start available    **  Star-Delta available
        Air (Pneumatic)
	     125PSI @20CFM(8.79kg @.56 m3/min)for tire inflation and precure stitcher cylinder

TIRE SIZES 
        Tire Diameters :  27" through 50" O.D. (686 - 1270 mm)
	Bead Diameter:  16.5" through 25" (420 - 635 mm) with multiple rims
	Cushion Gum thickness:- .040" through .090" (1.34 - 2.67 mm)
	Output Rate : 2.5 lbs to 3 lbs/min (1.14 - 1.36 kg/min)